China best M14/M28/M34/M38/M48 Bowex Nylon Sleeve Curved Teeth Coupling Customized Torque Gear Coupling

Product Description

Product Description

Product Characteristics
– Double-Section tpye curved-tooth gear couping
– Widely applicable in various mechanical & hydraulic felds
– Nylon & steel matched, maintenance free
– Able to offset axial, radial & angular misalignments
– Axial plugging assembly, very convenient
Nylon Toothed Sleeve Characteristics
– Excellent Mechanical Performance
– High rigidity
– High temperature resistance (+100C)
– Not embrittled at low temperature
– Good slippery & frictional behaviour
– Excellent electrical insulation behaviour
– Chemical corrosion endurable
– HIgh Accuracy of processing
Salient features

* Simple construction-quick easy installation-No special tools required.

* Flexible insert caters for incident angular, parallel and axial misalignment.

* Absorbs shock loads and damps small amplitude vibration.

* Insert design presets correct distance between hubs, using raised pads on each leg of the insert.

* Available in a range of stock bore sizes. Can also be supplied with finished bore & keyway.

* Unaffected by moisture, grease and oils-including 

   non-aromatic and non-ketone solvents and temperatures within the range 40C to + 100C.

* Spacer coupling with spacer size depending upon the distance between two shaft ends.

 

Detailed Photos

Product Parameters

Our Main Product

Timing belt pulleys, timing pulley bars, timing belt clamping plates.

Shaft locking devices (assemblies) and shrink discs: could be alternative for Ringfeder, Sati, Chiaravalli, BEA, KBK, Tollok, etc.

V belt pulleys and taper lock bush.

Sprockets, idler, and plate wheels.

Gear wheels and racks.

Shaft couplings: miniature coupling, curved tooth coupling, chain coupling, HRC coupling, normex coupling, FCL coupling, GE coupling, rigid and flexible coupling, jaw coupling, disc coupling, multi-beam coupling, universal joint, torque limiter, shaft collars.

Forging, Casting, Stamping Parts.Other customized power transmission products and Machining Parts (OEM).

Packaging & Shipping

Company Profile

 

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

tooth coupling

Capability of Tooth Couplings to Handle Torque and Angular Displacement

Yes, tooth couplings are designed to withstand high levels of torque and angular displacement. These couplings are capable of transmitting significant amounts of torque between shafts while accommodating angular misalignment. The teeth on the coupling’s hubs engage with each other, providing a secure connection that can transmit torque efficiently.

Angular displacement, also known as misalignment, occurs when the connected shafts are not perfectly aligned. Tooth couplings can accommodate a certain degree of angular misalignment without compromising their performance. The design of the teeth allows for a degree of flexibility, which helps in compensating for minor misalignments that may occur due to various factors.

However, it’s important to note that tooth couplings have their limits in terms of torque capacity and misalignment compensation. Excessive torque beyond the coupling’s rated capacity or severe angular misalignment can lead to premature wear, damage, or even coupling failure. Engineers should carefully consider the coupling’s specifications, application requirements, and operating conditions to ensure proper performance and longevity.

tooth coupling

Best Practices for Lubricating and Preserving Tooth Coupling Performance

Proper lubrication is essential for preserving the performance and extending the lifespan of tooth couplings. Here are the best practices for lubricating tooth couplings:

  • Choose the Right Lubricant: Select a lubricant that is compatible with the material of the coupling and its operating conditions. Consult manufacturer recommendations for suitable lubricants.
  • Regular Lubrication: Establish a regular lubrication schedule based on the coupling’s usage and operating conditions. Over-lubrication can cause issues, so follow recommended intervals.
  • Clean Before Lubrication: Clean the coupling’s teeth and surfaces before applying lubricant to prevent debris and contaminants from mixing with the lubricant.
  • Use Appropriate Amount: Apply the appropriate amount of lubricant to ensure proper coverage of the teeth and other moving parts. Excessive lubrication can attract dirt and lead to other problems.
  • Distribute Lubricant Evenly: Ensure that the lubricant is evenly distributed across the teeth and mating surfaces for consistent lubrication during operation.
  • Monitor Performance: Regularly monitor the coupling’s performance, noise levels, and any unusual vibrations. Changes in performance may indicate inadequate lubrication or other issues.
  • Inspect and Reapply: During maintenance intervals, inspect the coupling for signs of wear or inadequate lubrication. Reapply lubricant as needed to maintain optimal performance.
  • Temperature Considerations: Consider the operating temperature of the system when selecting a lubricant. Extreme temperatures can affect the viscosity and effectiveness of the lubricant.
  • Environment: If the coupling operates in a harsh environment, choose a lubricant that offers protection against contaminants, moisture, and corrosion.
  • Follow Manufacturer Guidelines: Always follow the manufacturer’s recommendations for lubrication frequency, lubricant type, and application methods.

Proper lubrication contributes to reducing friction, wear, and the risk of overheating, ensuring the tooth coupling operates smoothly and efficiently over its service life.

tooth coupling

Proper Installation and Maintenance of Tooth Couplings

To ensure the proper function and longevity of a tooth coupling, follow these guidelines:

Installation:

  • Ensure shafts are aligned within manufacturer specifications to prevent excessive loads on the coupling.
  • Clean and inspect the coupling components before installation to avoid debris or contaminants.
  • Use appropriate tools and methods to achieve proper fit between the coupling and the shafts.
  • Follow the manufacturer’s instructions for tightening bolts or fasteners to the recommended torque.

Maintenance:

  • Regularly inspect the coupling for signs of wear, such as tooth damage, corrosion, or misalignment.
  • Check for any abnormal vibrations, noise, or overheating during operation, which could indicate coupling issues.
  • Keep the coupling and surrounding area clean to prevent the accumulation of dirt or debris.
  • Regularly lubricate the coupling as per the manufacturer’s recommendations to reduce friction and wear.
  • Monitor the alignment of the connected equipment and address any misalignment promptly.
  • Replace worn or damaged components promptly to avoid further damage and maintain coupling performance.

Following proper installation and maintenance practices will help maximize the efficiency and service life of the tooth coupling.

China best M14/M28/M34/M38/M48 Bowex Nylon Sleeve Curved Teeth Coupling Customized Torque Gear Coupling  China best M14/M28/M34/M38/M48 Bowex Nylon Sleeve Curved Teeth Coupling Customized Torque Gear Coupling
editor by CX 2024-01-19